
Rigid plastic flooring
For different sizes, current stock or more information, please contact us at: +359888888094; elektrabg@abv.bg
Description
Rigid plastic flooring is made of high-density polyethylene (HDPE) and is a sheet material suitable for the transport and construction industries. The sheets are black in color and have an anti-slip coating on both sides, with coarse ribbing (checker pattern) on one side and fine ribbing (checker pattern) on the other. This helps the customer make an easier choice when choosing the flooring, and on construction sites it implies better adhesion of the plastic flooring to the ground.
Rigid plastic flooring is an excellent choice for vans, trucks and any equipment moving heavy loads, due to the excellent strength and toughness of the sheets. Polyethylene flooring withstands all types of weather conditions, thanks to the operating temperature of the material, which guarantees its excellent performance even in the winter months. Plastic flooring is 100% waterproof, does not absorb water and does not rot, which allows for long-term use of the flooring without the need for frequent replacement. Impact-resistant flooring has excellent strength and is suitable for construction sites as a ground flooring for construction equipment and the workforce.
The dimensions of the rigid plastic flooring allow it to be easily transported. For this purpose, handles have been made that facilitate the movement and installation of the sheets. Holes are made in the corners of the plates for gripping a consecutive number of the waterproof flooring sheets. Plastic flooring is easy to cut, drill and process.
Areas of application
- trailers
- vans
- trucks
- flatbed vehicles
- in construction sites as flooring
- base for rough construction, overcoming mud
- under heavy duty and heavy load application and where good traction is needed
- when carrying heavy objects and construction equipment
- for temporary paths and sidewalks during repairs
- for mobile platforms and roadside assistance vehicles
- for temporary roads
- for protecting green areas during construction work
- in livestock farming as a cattle path
- others
Stock
| Thickness (mm) | Width (mm) | Length (mm) | Anti-slip layer |
| 10 | 1000 | 2000 | two-sided |
| 15 | 1500 | 3000 | two-sided |
| 20 | 1500 | 3000 | two-sided |
Specifications
| Properties | Unit | Value |
| Material | HDPE | |
| Density | g/cm³ | 0.93-0.97 |
| Tensile strength | MPA | 20 |
| Notched impact strength | Kj/m2 | No break |
| Elongation at break | % | >100 |
| Water absorption over 24 hours | % | <0.01 |
| Dielectric constant at 1MHz | MHz | 2.3-2.4 |
| Dissipation Factor@1MHz | 1-10*10¯⁴ | |
| Dielectric strength | KV/mm | 22 |
| Surface resistivity | Ohm/sq | 1013 |
| Volume resistivity | Ohm-cm | 1015 -1018 |
| Acids-concentrate | Good–Fair | |
| Acids-dilute | Good | |
| Aromatic hydrocarbons | Fair | |
| Greases and Oils | Good-Fair | |
| Ketones | Good-Fair | |
| Alcohols and Alkalis | Good | |
| Radiation resistance | Fair |